• Omega rangehoods ORC97G

ORC97G

RRP: $799.00
  • > Manual
  • > Specifications
  • > High Res Image

    Omega 90cm curved glass canopy rangehood with 2 halogen lights with stainless steel and glass finish.
  • features

  • Finish:
    Stainless steel with curved glass
    Control type:
    Backlit push buttons
    Extension flue:
    No
    Installation:
    Wall mounted
    Warranty:
    24 months parts and labour
     

  • specification

  • Profile type:
    Glass canopy
    Size:
    90cm
    Number of motors:
    1
    Watts of motor:
    265W
    Airflow M3/HR:
    852 NET
    Speeds:
    3
    Lighting type:
    2 x 20W halogen
    Washable aluminium filters:
    1
    Carbon filter:
    No
    Air extraction:
    Ducted or Recirculated
    Noise level:
    64dBA
    Product dimensions (mm):
    1040h x 900w x 500d
    Flue diameter (mm):
    150mm
    Weight:
    16.2kg
    Power cable:
    3 pin plug
    Maximum current:
    10amps
    Connection:
    240V, 50Hz

  • ORC97G

    ORC97G is rated 4.3 out of 5 by 3.
    Rated 5 out of 5 by from Great unit Works very efficiently. My recommendation, mount the upper chimney bracket to the wall at a height so the holes for the retaining self tappers are just clearing the cornice, ie. When you look up at the cornice, you will barely see the bracket screw holes. Then just elongate the long slot in the sides of the upper chimney. When installed, the screw heads are hardly noticeable right against the cornice and can easily be removed for any service requirements. Also received great service from the factory regarding a dented chimney piece on delivery.
    Date published: 2016-12-08
    Rated 5 out of 5 by from Omega - Omega Canopy Rangehood ORC97G Very happy with your service, efficient.thank you.
    Date published: 2016-03-06
    Rated 3 out of 5 by from Review Nice looking unit, adds a good finish to a modern kitchen with a 900 wide oven/hob arrangement. Was an absolute nightmare to install to the wall as I have a ceiling with a cornice and the last two mounting screws are unaccessible due to being right up in the top corner of the unit where it meets the wall behind the cornice. It had to be done from inside the ceiling by cutting an additional hole in the roof behind the top cover. This unit is rather loud in my opinion.
    Date published: 2015-12-01
    • y_2017, m_9, d_20, h_2
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_en_AU, sid_1583, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_omega-appliances
    • bvseo_sdk, p_sdk, 3.2.0
    • CLOUD, getContent, 21.39ms
    • REVIEWS, PRODUCT